Do you know what is an infrared automatic soap dispenser? An automatic sensor soap dispenser is actually a device that dispenses a controlled amount of soap or sanitizer solution. They are often used in conjunction with automatic sensor faucets in public restrooms. The implementation of automatic washroom supplies has increased dramatically, especially in corona virus period. An increasing number of public locations and private institutions have been incorporating touchless technology into their washrooms. When hands are placed in the proximity of the sensor, the infrared energy quickly fluctuates. This fluctuation triggers the pump to activate and dispense the designated amount of soap.

Rajeyn launched a new automatic soap dispenser RJY-60-B103AD. This soap dispenser has nice looking and more importantly, can dispense both liquid soap and foam soap depending on your needs. Today we will have a brief introduction for this new model. It’s important to know that foam soap OR mixed liquid soap is required (liquid soap & water proportion 1:2). Unit`s infrared sensor may not work properly if unit is installed near a reflective surface or if it is facing bright lights.

OTHER IMPORTANT NOTE:

*Priming soap dispenser for first time use: Swipe your hands five to eight (5-8) times across the sensor to prime the dispenser until soap dispensed. The soap dispenser is now primed and will dispense soap as the dispense-time set.

*Please make sure no any impurities in the soap.

*Please shake up the mixed liquid soap before put it into usage.

How about the trouble shooting? Below is the chart for your reference.

Short battery life span Bad/old batteries Replace batteries
Undetected Batteries run out Replace batteries
Soap volume decreased Soap nozzle blocked Replace soap nozzle
No soap flow Batteries run out Replace batteries
Dirt on sensor case Clean the sensor case
Soap bottle empty Pour soap into the soap bottle
Soap nozzle blocked Replace soap nozzle