Urinal Sensor
Rectangle Sensor Plate
Function
- Automatic flushing: pre-flush 2 seconds and after flush 6 seconds. After-flush timing adjustable by remote controller. Adjustable range 3-24 seconds.
- Low power reminding: When the battery is low, the indicator light flashes for 10 seconds to remind you of replacing with new batteries. The flush valve will not flush.
- Anti-reverse wire connection: The sensor will not be heat or damaged if the power supply wire positive and negative terminals are reversely connected. The sensor will work normally if wires are correctly connected.
- Power protection: When the battery or mains power suddenly cut off, the sensor will automatically turn off the solenoid valve within 20 seconds.
Feature
- It is suitable for the separate design of sensor plate and water flush nozzle. The sensor plate is designed according to the ceramic opening size.
- Sensor plate is made of stainless steel or copper.
- Product includes: sensor plate + solenoid valve (with water sealing rubber) + water inlet hose + power supply.
Technical Parameters
| ITEMS | Parameters | ITEMS | Parameters |
|---|---|---|---|
| The max Voltage | 8V | Sensor Distance | 65CM±10% |
| Working Voltage | DC6V/AC220V(50~60Hz) | Working Life | ≥250,000 circles |
| Static Current | ≤25uA | Working Temperature | 1~60℃ |
| Working Current | ≥300mA | Storage Temperature | -20~70℃ |
| Battery Life Span | ≥2Years | Working Pressure | 0.05~0.6MPa |
| Water Temperature | 1~60℃ | Blasting Pressure | 3.45MPa ≤300S |
| Working Mode |
User in the sensor range for 3 seconds, the flush valve will go to 2 seconds pre-flush. User leaves sensor range for 3 seconds, the flush valve will go to 6s after-flush. |
Inlet/Outlet Size | G1/2 |
Sensor Photos
schematic diagram
Application
BOM
